Do you want to make your home more comfortable with complete air circulation? If yes, we recommend installing a ceiling fan which is considered the best addition to your home. Installing a ceiling fan has significant advantages in any weather; whether it is concerned with circulating warm air in winters or helps to cool down in summers.
By installing a ceiling fan, you can increase the serenity and comfortability of living and save a lot on energy bills. Another significant advantage of installing a ceiling fan is that it will keep flies away while eating it.
It is a short and straightforward project. We need to install the ceiling wiring in the selected area where the fan is mounted. Run and connect the new wires, then install the electric wires and mount the fan.
Always remember before installing the wiring, always switch off the electricity. However, we must know the standard operating procedures for installing ceiling fans where no fixture exists. Before going further, you must look at this article for proper guidance.
It always seems easy to install a new ceiling fan by yourself, but there is always a high risk of danger and damage while installing a new fan without less knowledge and less experience.
Installing a ceiling fan is entirely a different and unique project. Therefore, it is mandatory to hire a licensed electrician to follow standard operating procedures and reduce the risk. Which are concerned with wiring and other activities involved in ceiling fan installation. A licensed electrician will always have good knowledge and experience.
Following are the standardized steps a licensed electrician will always follow to install a ceiling fan where no fixture exists.
Installing a ceiling fan where no fixture exists is easy, but it is always concerned with safety issues. Whether it is concerned with running the wire or mounting the ceiling fan. You are always playing with power. Therefore this step plays a core role in avoiding risks and hazards. Just follow the below-given steps for your safety:
Before installing a ceiling fan, you will have to answer two sizable questions. The first one is where you want to install, and the second one is how to supply power to the respective location. Various factors depend on whether you are replacing an old fan or you are installing a new fan.
If you are replacing an old fan, you don’t have to worry about the location because it is already known. Just take away the screws holding the fixture, and then disconnect the wirings to remove the fixtures entirely.
For a new fan installation, the electrician will always spot the area for installation. The air will circulate throughout the room, especially near the place where the dining table and bed are placed.
You must check if there is any damage or crack on the ceiling or near the surroundings. It is essential to take this step seriously. Because once the wrong decision is taken. It becomes a serious threat and can cause a hazard.
There is a diversity in ceiling fans. It is varying the weight from 15 to 50 pounds (6.8kg to 22.6kg). So, the licensed electrician will always prefer a location that has proper support joists. If the fan is not appropriately attached to the ceiling, it could fall and lead to severe injuries.
You have to ready the electrical box before running wires. Now, switch off the power and start to run the wire from any power supply that can be used for the fan. There are always different situations for running the wires. Sporadically there is easy accessibility to the garret, or in some cases, there is another floor above your room. The running of wire could be effortless sometimes, and in certain instances, it becomes tricky.
The electrician will install the switch that controls the fan. Wiring will be linked from the switch to the fan by using fish tape. The fish tape will be used to pull the wiring through the wall to the fan. When the scenario is easy, the electrician will simply bring the wire from the electric circuit. Run the wire through the hole you have cut in the sheetrock.
But when the scene is worst, having a room above the floor. The electrician would have to cut many holes and drill holes with every joist between the wall. In such cases, the electrician might need help.
There is no chance of a mistake while running the wire from the switch to the fan. Therefore it is necessary to mount the wire properly. If the breaker is running 20 amps, the electrician will need 12 gauge wire, but if the breaker is 15 amps, the electrician will need 14 gauge wire.
Otherwise, once the mistake has been made, there is a high risk of a short circuit.
Once the wires are run, the licensed electrician will install a new ceiling fan electrical box. However, there are several ways of installing the electric box. That will be done by nailing the electric box to the joist.
If two support joists are in the desired location, then the electrician will need a brace and saddle to support the fan. It is important to connect the brace to the joists properly and avoid plastic boxes if your fan is on the heavier side.
It is necessary to check the installation manual for which specific type of brace you are using.
There are several ways to connect the fan bracket to the electric box and mount the fan, which always depends on the fan model. According to the wiring diagram, the electrician will mount the fan. According to the instructions of the production company and connect the wires to the fan.
You will have to use a holding fixture to hang the fan. In the whole process, you will be dealing with a white wire, black wire, blue wire, and a bare copper wire that appears from the fan’s upper part.
There are also ground wires which are needed to be fixed together by using a wire nut. You have to join the white wire from the fan and to the white wire of the power supply cable.
The black wire must be connected with the white wire of the supply cable. There will be a black wire from the fan connected to the white wire(black tapped). At last, connect the blue wire from the fan to the red one. Once the fan is mounted correctly, turn on the power back to the circuit to check the ceiling fan.
Without knowing how to install ceiling fans where no fixture exists, installing a ceiling fan or wiring becomes difficult and dangerous. There is always a high risk of injury, damage, and hazards if you have no knowledge or little knowledge about installing a new ceiling fan.
Therefore, it is mandatory to hire a licensed electrician to remove the risk and hazards. Properly allocate the location, install wiring, and mount the fan. Once the area is figured out and fished, electrical wiring and installed electric box mount the new fan to the ceiling.
Always try to hire a licensed electrician to avoid any hazard or risk or keep your family and children safe. Optimistically we have guided you on how to install a ceiling fan where no fixture exists.
